• Connects two IP/PoE devices to a PoE switch or
NVR using a single Cat5/6 cable.
• Provides up to 15.4W to each of the 2 devices
on type 1 - POE IEEE 802.3af.
• Provides up to 25.5W to each of the 2 devices
on type 2 - POE+ IEEE802.3at
• Switchable between Type B (UK Standard) &
Type A (USA & Asia)
• Reduces installation costs and time
• Compatible with both IEEE 802.3af and IEEE
802.3at
• No POE injector or psu required
• Can be used with a non PoE switch or NVR,
where the cameras are powered by a separate
power supply
• Low cost and easy to use (Plug N play).
• Mode A power and data on pins 1&2 (-) and
pins 3&6 (+) (USA & Asia)
• Mode B power on pins 4&5 (+) and pins 7&8 (-)
with data on pins 1&2 and 3&6 (UK & Europe)
CAT 5/6 up to 100 metres
